• v0.9.12 5120a4e1f0

    SavePoint 0.9.12 (pre-release, superseded)
    All checks were successful
    Docs / site (pull_request) Successful in 1m23s
    Gate / linux (pull_request) Successful in 14m14s
    Gate / windows (pull_request) Successful in 34m9s
    Docs / site (push) Successful in 1m40s
    Release / linux (push) Successful in 2m33s
    Gate / linux (push) Successful in 15m1s
    Gate / windows (push) Successful in 33m49s
    Release / windows (push) Successful in 2m51s
    Release / checksums (push) Successful in 33s
    Pre-release

    ethan-hann released this 2026-10-25 19:10:31 -05:00 | 607 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.13, which tells you when a session ends behind another window, fixes Steam games on Linux and the table corners. Install 0.9.13 over it. These files stay here unchanged so their checksums still match.

    Windows: install 0.9.11 first, start it once, then install this. 0.9.11 moves your snapshots out of %LOCALAPPDATA%\SavePoint; this release's installer uses that folder for the app and empties it. If you are on 0.9.10 or older, install 0.9.11 and start it once before this one, or the snapshots left in the old folder are lost.

    On Linux, and on Windows from 0.9.11, install it over the old version; your games, profiles and snapshots stay as they are.

    Changed

    • Windows: one name everywhere. The Windows app is now installed as SavePoint, like the Linux one. This setup installs beside the old one rather than over it: after installing, open Windows Settings > Apps and remove "SavePoint 0.9.11". Your snapshots and the Start menu shortcut stay where they are.
    • Games that start through a small starter end their session on their own. Some games' program is only a starter that hands over to the real game elsewhere in its folder (Eve Online is one). SavePoint now follows that hand-over and ends the session when the real game closes. Store apps, launchers and browsers the game opens are not followed, so they never keep a session open. (#56)
    • Sharper icon. At small sizes (the title bar, the taskbar) the icon uses a filled bookmark instead of a thin outline, and the window icon is drawn for its size. The bookmark in the app sits centered in its tile. (#20)

    Faster

    • Less work before every switch and save. SavePoint now checks the folder's index itself for files it marked during an earlier switch, instead of asking git every time; on a game with 50,000 files that check takes about half as long, and far less on smaller games. (#140)

    Fixed

    • Dialog buttons are no longer cut off. The outline that shows which button has the keyboard focus was clipped at the bottom of every dialog's buttons. Dialogs now leave room for it.
    • Clearer Activity details. A profile's first snapshot now reads "Taking the first snapshot of ..." instead of repeating the profile's name twice.

    Documentation

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.11 1712815970

    SavePoint 0.9.11 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 13m11s
    Gate / windows (pull_request) Successful in 33m37s
    Wiki / publish (push) Successful in 1m24s
    Release / linux (push) Successful in 2m41s
    Gate / linux (push) Successful in 14m5s
    Gate / windows (push) Successful in 34m40s
    Release / windows (push) Successful in 2m24s
    Release / checksums (push) Successful in 34s
    Pre-release

    ethan-hann released this 2026-10-25 15:03:47 -05:00 | 645 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.12, which installs on Windows as SavePoint, follows games that hand over from a small starter, sharpens the icon and stops dialog buttons being cut off. Install 0.9.11 first if you have not, start it once, then install 0.9.12. These files stay here unchanged so their checksums still match.

    Windows: install this release before the next one. SavePoint used to keep your snapshots in %LOCALAPPDATA%\SavePoint. The next release's installer empties that folder, so this release moves them out first, to %LOCALAPPDATA%\SavePoint Data. Install 0.9.11 over your current version and start it once; the move takes a moment and nothing else changes. If you skip straight from 0.9.10 or older to a later release, the snapshots left in the old folder are lost.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    Changed

    • Windows: your snapshots move out of the installer's folder. On first start, the snapshot folder and the logs move from %LOCALAPPDATA%\SavePoint to %LOCALAPPDATA%\SavePoint Data. A snapshot folder you chose yourself is never moved. If the move cannot happen (a file in use, for example), SavePoint keeps using the old folder and shows a warning until you move the snapshot folder from Settings. Settings no longer lets you put the snapshot folder inside SavePoint's install folders.
    • Closing during a snapshot asks first. Closing SavePoint while a snapshot runs now asks what to do: Minimize keeps the snapshot going in the background and tells you when it is done, Close and stop the snapshot ends it, and Stay open does nothing.
    • Linux: one name everywhere. The AppImage now calls itself SavePoint, so notifications and the window list show SavePoint instead of SavePointApp. Download this AppImage to replace the old one; the old one does not update to it on its own. (#132)

    Faster

    • Switching profiles with left-out files. Switching a big game whose leave-out list names many files spent seconds lining them up first; in a measured case that went from 12.8 seconds to 0.7. (#137)

    Fixed

    • A game's exit is noticed at once. When a game closed at just the wrong moment, SavePoint could take up to two extra seconds to notice and start the after-play steps.

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.10 4c57e3ed4c

    SavePoint 0.9.10 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 12m4s
    Gate / windows (pull_request) Successful in 31m58s
    Wiki / publish (push) Successful in 52s
    Release / linux (push) Successful in 2m27s
    Gate / linux (push) Successful in 12m15s
    Gate / windows (push) Successful in 31m42s
    Release / windows (push) Successful in 2m41s
    Release / checksums (push) Successful in 36s
    Pre-release

    ethan-hann released this 2026-10-25 09:56:16 -05:00 | 681 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.11, which moves Windows snapshots out of the installer's folder (install it before any later release), asks before closing during a snapshot, and speeds up switching profiles with left-out files. Install 0.9.11 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    Faster

    • Free up space only rewrites what it frees. On a big game, Free up space used to rewrite the whole snapshot store every time, even with nothing to free: about 5 minutes on Cyberpunk 2077 (91 GB), with room needed for a second copy. It now leaves alone everything still in use, so with nothing to free it takes well under a second, and it only asks for the disk space it will really use. (#133)

    Changed

    • Copy that says things once. The help, the tour, dialogs and error messages were cut down: each idea is explained in one place, tour steps are one sentence, and messages no longer repeat their titles. (#123)
    • Nothing to keep, nothing recommended. When a game session changed nothing, the after-play dialog recommends Not now instead of keeping a copy of the last snapshot. (#130)
    • More of a snapshot's details. Activity's Details still shows the newest 200 lines, and Copy now takes up to 20,000, enough for every file of a big first snapshot. The line about the big file being copied now says it is SavePoint's best guess. (#118)

    Fixed

    • Linux: quitting during a snapshot. Closing SavePoint while a snapshot ran could leave a git process behind, which also kept the AppImage mounted. Every git SavePoint starts now ends with it. (#127)
    • Linux desktop checks. The "No saves folder is set yet" note no longer runs off the Add a game form, a disabled Play button says why it is disabled, and large file counts read "200,000" rather than "200000". (#128, #129, #131)

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.9 5dbb1935d6

    SavePoint 0.9.9 (pre-release, superseded)
    Some checks failed
    Gate / linux (pull_request) Successful in 13m4s
    Gate / windows (pull_request) Successful in 30m9s
    Wiki / publish (push) Successful in 54s
    Release / linux (push) Successful in 2m6s
    Gate / linux (push) Successful in 12m37s
    Gate / windows (push) Successful in 30m47s
    Release / windows (push) Successful in 2m27s
    Release / checksums (push) Failing after 33s
    Pre-release

    ethan-hann released this 2026-10-25 05:45:10 -05:00 | 720 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.10, which makes Free up space on big games take seconds instead of minutes, cuts down the app's copy, and fixes quitting during a snapshot on Linux. Install 0.9.10 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are. This is the first release since 0.9.7; 0.9.8 was never published.

    Faster

    • Switching and going back on big games. After a switch, SavePoint no longer reads every newly written file again on each later check. On a 12 GB install, removing a 4 GB file went from about 42 seconds across the preview, the check before playing and the switch to about 2 seconds, and the dialog shows progress the whole way. (#104)
    • Files you leave out are read once per switch. A left-out cache that differs between two snapshots was read three extra times on every switch; a 2 GB cache switch went from about 22 to about 15 seconds. (#110)
    • Big game files stay put. The background tidy-up after snapshots no longer copies a game's large files into a new pack every few snapshots, which on Cyberpunk 2077 meant rewriting about 85 GB. (#120)

    New

    • Snapshot details name every file. While a snapshot runs, Activity's Details lists each file as it is stored, and a long copy says which big file it is on. (#108)
    • Logs and crash reports are left out. New games leave out .log, .dmp and .mdmp files from the game's own folder, so a mod loader rewriting its log no longer looks like a game update. After play, if the only changes are logs or crash reports, SavePoint says so and offers to leave them out from now on. Your saves folder is never affected, and Edit game now has a separate list for rules that apply to the game's own folder. (#109, #115)

    Fixed

    • The right profile after a switch. The after-play dialog and the save list name the profile your session really started from, and Replace is only offered when it can't touch a snapshot another profile shares. (#105)
    • Bringing back part of a snapshot. After a Replace that changed only your saves, bringing the old saves back from Recently removed makes a profile that shows in History on its own, and the snapshot can come back again if you later delete that profile. (#111)
    • A forced switch keeps your left-out files. A switch that overwrites unsaved changes no longer rewrites a left-out file you edited when both snapshots hold it the same. (#110)
    • Left-out files stay out. When a file a snapshot recorded is replaced by a folder of the same name, files your rules leave out inside it no longer end up in storage. (#121)
    • Unreal games show their real version instead of an internal build string. (#103)
    • Smaller fixes. Activity keeps the five jobs it says it keeps (#106), a tooltip no longer stays behind a dialog (#107), the start screen's buttons are centered (#124), and removing the Linux apps menu entry also removes the empty icon folders it made (#101).

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • Free up space on a big game rewrites the whole store even when there is nothing to free, which takes minutes and needs room for a second copy (#133).
    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.7 e7e2752fe8

    SavePoint 0.9.7 (pre-release, superseded)
    Some checks failed
    Gate / linux (pull_request) Successful in 12m10s
    Gate / windows (pull_request) Successful in 25m16s
    Release / linux (push) Failing after 46s
    Gate / linux (push) Successful in 12m30s
    Gate / windows (push) Successful in 25m54s
    Release / windows (push) Failing after 30s
    Release / checksums (push) Has been skipped
    Pre-release

    ethan-hann released this 2026-10-24 21:53:14 -05:00 | 823 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.9, which makes switches on big games much faster, names every file in a snapshot's details, and leaves logs and crash reports out of the game's own folder. Install 0.9.9 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    New

    • Cover art for GOG games. Games installed through GOG Galaxy now show their cover, taken from the pictures GOG Galaxy already keeps on your computer. SavePoint makes no network request for them. A Steam app ID you type in Edit game still wins, and your own image always does. Windows only for now. (#26)
    • Linux: SavePoint in your apps menu. When you run the AppImage, Settings can add SavePoint to your apps menu with its icon, so you can open it from the desktop and pin it to the dock. It saves a few small files in your own folder, and you can remove them there again. (#83)

    Fixed

    • When SavePoint never saw the game. If the game's program name in Edit game never showed up as a running program, the after-play dialog used to report about two minutes of play. It now says SavePoint didn't see the game running, suggests the name may be wrong, and offers to open Edit game; your new saves stay as they are until you choose. If the program SavePoint started did run, you get the real play time and a gentler hint. With the after-play dialog turned off, a message says the same once. (#62)
    • The right program first. The start-file list in Edit game puts the game's own program first, ahead of launchers and crash reporters, the same way the program name suggestion does. (#58)

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.6 2b24a77847

    SavePoint 0.9.6 (pre-release, superseded)
    Some checks failed
    Gate / linux (pull_request) Successful in 12m9s
    Gate / windows (pull_request) Successful in 25m31s
    Gate / linux (push) Successful in 11m55s
    Gate / windows (push) Failing after 23m53s
    Pre-release

    ethan-hann released this 2026-10-24 20:10:49 -05:00 | 853 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.7, which adds cover art for GOG games, an apps menu entry for the Linux AppImage, and says when SavePoint never saw the game running. Install 0.9.7 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    Faster

    • The first Free up space on a big game is quicker. Right after a big first snapshot, SavePoint tidies the new snapshot in the background. On Unity games it no longer searches their already-compressed bundles for small differences, and it compresses at a lighter level. On a 21.5 GB game (7 Days to Die) that tidy-up took 5 minutes instead of 9 1/2, for about 1% more disk space. Saves and settings files are still compressed, and going back after a game update works as before. (#92)

    Fixed

    • The switch dialog says what it removes. Going back to an older snapshot now also tells you how much the switch removes, not only how much it replaces. Renaming a file by changing only its upper or lower case is no longer counted as removing it. (#86)
    • Clearer save count. "Saves to load" now reads "N save snapshots to choose from". A profile made from another one also offers the saves it started with, and the user guide explains why. (#87)
    • Picking a game in the sidebar. Clicking a game, or pressing Enter on it, now opens it from Settings or from the help page, even when it is already selected. Moving through the list with the arrow keys only marks a game, so it never pulls you off a half-filled Settings page. Screen readers can open a game too. (#88)
    • Sidebar buttons keep their labels inside. "Add games from your libraries" and "Add a game" wrap inside their buttons instead of running past the edge. (#89)
    • Small windows. In a short window, the launch card scrolls with the profiles instead of sitting under the messages in the corner. (#84)
    • Each file once. A snapshot's details on the Activity screen list each changed file once; a large file used to show up many times in a row. (#91)

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.5 e4c7818774

    SavePoint 0.9.5 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 11m6s
    Gate / linux (push) Successful in 11m16s
    Pre-release

    ethan-hann released this 2026-10-24 16:06:52 -05:00 | 878 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.6, which makes the first Free up space on big Unity games much quicker, says what a switch removes, and fixes picking a game in the sidebar. Install 0.9.6 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    New

    • Add games from your libraries. SavePoint finds the games installed through Steam and GOG Galaxy and shows them as a checklist. Tick the ones you want, check the folders once, and they are all added. Games already added are marked, and every game gets the same safety checks as adding it by hand. (#70)
    • Templates for about 320 games. Choosing a game now fills in where it saves and how it starts, for about 320 popular games, each checked against PCGamingWiki. When a game keeps its saves somewhere SavePoint can't safely name (under an account number, or in Steam's own folder), the template says so and you pick the folder. The template list has a search box. (#69)

    Fixed

    • Games that restart themselves through Steam. Some Steam games, started directly, close and have Steam start them again. SavePoint used to think you had finished playing after one second. It now follows the game to the end, and a normal quit still ends the session right away. (#74)
    • Messages no longer push the window up. The messages in the bottom-right corner float over the app instead of shrinking it, and never cover a button. (#73)
    • Linux: desktop notifications now show on GNOME (#75), starting SavePoint a second time brings the open window forward (#76), the window matches its desktop entry so its icon shows once the AppImage is integrated (#78), and on a drive that ignores upper and lower case, a profile holding two names that differ only in case is refused before anything changes (#77).
    • Smaller fixes: the switch dialog names only what changes ("Going from 2 mod files to no mods"), and the tour's first card no longer hides the profile list. (#79)

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • SHA256SUMS.txt lists the hash of every file.
    • The source code of the bundled git is on its own page, git-sources-2.56.0.2, published as the GPL asks.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • git-sources-2.56.0.2 65075af490

    Source code of the bundled git 2.56.0.2 (not an app release)
    All checks were successful
    Gate / linux (pull_request) Successful in 9m28s
    Gate / linux (push) Successful in 9m12s
    Pre-release

    ethan-hann released this 2026-10-24 15:09:45 -05:00 | 932 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Not an app release. This page holds the source code of the git that SavePoint bundles, published as the GPL asks. To get SavePoint itself, use the newest SavePoint release.

    It covers every SavePoint release that bundles these versions, starting with 0.9.5:

    • git 2.53.0 (git-git-v2.53.0.tar.gz)
    • Git for Windows 2.56.0.windows.2, the MinGit bundle in the Windows packages (git-for-windows-git-v2.56.0.windows.2.tar.gz)
    • dugite-native 2.53.0-4, the bundle in the Linux and macOS packages (desktop-dugite-native-v2.53.0-4.tar.gz)
    • the source of every MSYS2 and MINGW package inside MinGit 2.56.0.2 (the .src.tar.zst and .src.tar.gz files), as listed in build/msys2-sources.json

    A file larger than this server accepts in one piece is split into .part1, .part2 and so on; join the parts in order to get the original, whose hash is in SHA256SUMS.txt. When SavePoint updates its bundled git, a new page like this one is published and the release notes link to it.

    Downloads
  • v0.9.4 65075af490

    SavePoint 0.9.4 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 9m28s
    Gate / linux (push) Successful in 9m12s
    Pre-release

    ethan-hann released this 2026-10-24 12:55:22 -05:00 | 932 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.5, which adds games from your Steam and GOG Galaxy libraries, templates for about 320 games, and fixes for launches seen as ended too early. Install 0.9.5 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    Faster

    • First snapshots of big games are faster. SavePoint no longer spends time squeezing game files that are already compressed. On an 85 GB game (Cyberpunk 2077) on a fast NVMe drive, the first snapshot took 9 minutes instead of 35, for about 2% more disk space. On a slower drive the drive itself sets the pace, so the gain is smaller. Your existing snapshots are not rewritten, and Free up space still compresses small files such as saves. (#45)

    Fixed

    • Empty folders come back. Some games ship empty folders that mod tools expect, such as Cyberpunk 2077's archive\pc\mod. Switching to a profile that filled such a folder and back used to leave it missing. Snapshots now remember their empty folders and bring them back. Snapshots taken before this version don't have that list yet; take a new one to include it. (#66)
    • The end of a big first snapshot no longer looks stuck. For the last few minutes of a large first snapshot the bar used to sit still. It now says SavePoint is making sure everything is stored safely. (#67)

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • The .tar.gz, .src.tar.zst and .src.tar.gz files are the source of the bundled git and of every MSYS2 and MINGW package inside the Windows git bundle, published as the GPL asks. A file larger than this server accepts in one piece is split into .part1, .part2 and so on; join the parts in order to get the original, whose hash is in SHA256SUMS.txt.
    • SHA256SUMS.txt lists the hash of every file.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • The Linux desktop behavior (notifications, launcher-started games, single instance) has not been checked on a real desktop (#3).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.3 76d2b22bd7

    SavePoint 0.9.3 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 13m45s
    Gate / linux (push) Successful in 12m35s
    Pre-release

    ethan-hann released this 2026-10-24 03:20:32 -05:00 | 969 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.4, which makes first snapshots of big games faster and brings back empty folders a switch used to remove. Install 0.9.4 over it. These files stay here unchanged so their checksums still match.

    Install it over any 0.9 release; your games, profiles and snapshots stay as they are.

    New: switch without playing

    Until now the only way to put a profile's files into the game's folders was Play, which always started the game. Now you can load the files and stop there, for example to work on mods in a mod manager, copy a save, back up the folder yourself, or start the game some other way. (#30)

    • On the Games screen, open a profile's menu and choose Switch to this profile.
    • In History, choose Switch to this snapshot on any snapshot.
    • You get the same preview as Play, naming what will change in each folder, and the same choices for changes you have not saved yet. A running game or a file another program holds stops it, as with Play, and Try again finishes it.
    • It shows in Activity and you can cancel it. When it is done, the profile reads "Loaded now", SavePoint tells you the game was not started, and no after-play questions follow.
    • Messages that used to say "Play this profile first" now offer the switch instead.

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • The .tar.gz, .src.tar.zst and .src.tar.gz files are the source of the bundled git and of every MSYS2 and MINGW package inside the Windows git bundle, published as the GPL asks. A file larger than this server accepts in one piece is split into .part1, .part2 and so on; join the parts in order to get the original, whose hash is in SHA256SUMS.txt.
    • SHA256SUMS.txt lists the hash of every file.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • The Linux desktop behavior (notifications, launcher-started games, single instance) has not been checked on a real desktop (#3).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads