• v0.9.2 9494fa3fed

    SavePoint 0.9.2 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 12m12s
    Gate / linux (push) Successful in 12m3s
    Pre-release

    ethan-hann released this 2026-10-24 02:50:01 -05:00 | 986 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.3, which adds switching to a profile or snapshot without starting the game. Install 0.9.3 over it. These files stay here unchanged so their checksums still match.

    A patch for 0.9.1. Install it over 0.9.0 or 0.9.1; your games, profiles and snapshots stay as they are.

    New

    • SavePoint suggests the game's program for games started through a link. When you pick "Start through a link" (Steam and similar) and leave the process name empty, the game editor suggests the game's own program from its install folder, with a Use button, and says why it matters: without it SavePoint cannot tell when the game closes. On a test machine with 205 installed games, it picked a sensible program for all but two. (#41)
    • More time for slow launchers. A game started through a link now has two minutes to appear, up from 30 seconds, so a launcher that takes a while no longer ends the session before the game is even running. (#41)

    Fixed

    • Plainer error messages. "Show details" on an error no longer shows raw technical text. It explains what happened and offers Copy details for support for a bug report. A file in use or a full disk now names what was going on (a switch, a snapshot, Free up space, moving the snapshot folder, or clearing SavePoint's data) instead of always talking about a switch. (#12, #13)
    • No more internal folder names. Moving the snapshot folder or clearing SavePoint's data lists each game's folders in Activity and Settings, never SavePoint's own internal folder names. (#11)
    • Nothing hides behind the status pill. While a job runs, the Games, History and Activity footers, banners and cards move up so the status pill never covers them. (#9)
    • History at small window sizes. History now scrolls as a whole and always keeps room for at least three snapshots, even with Recently removed open. (#10)
    • Startup explains a wait. If SavePoint was closed during a long cleanup, the next start says it is finishing that cleanup instead of sitting on "Checking your files..." with no explanation. (#8)
    • Moving an empty snapshot folder. After "Start with an empty folder", you can move the snapshot folder right away instead of waiting until a game has saved. (#21)
    • A folder with nothing new says so. When an update finds nothing new in a folder, the result says that folder's snapshot stayed as it was, instead of counting it as saved. (#22)
    • Cmd+C on macOS copies job details in Activity, as Ctrl+C does elsewhere. (#4)
    • Linux: a finished background task that was never cleaned up no longer makes SavePoint wait at the next start. (#35)

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • The three git, git-for-windows and desktop-dugite-native .tar.gz files are the source of the bundled git. New in this release: the source of every MSYS2 and MINGW package inside the Windows git bundle (the .src.tar.zst and .src.tar.gz files), published as the GPL asks (#16). A file larger than this server accepts in one piece is split into .part1, .part2 and so on; join the parts in order to get the original, whose hash is in SHA256SUMS.txt.
    • SHA256SUMS.txt lists the hash of every file.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • The Linux desktop behavior (notifications, launcher-started games, single instance) has not been checked on a real desktop (#3).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.1 cd44e88f57

    SavePoint 0.9.1 (pre-release, superseded)
    All checks were successful
    Gate / linux (pull_request) Successful in 14m9s
    Gate / linux (push) Successful in 13m13s
    Pre-release

    ethan-hann released this 2026-10-23 23:41:31 -05:00 | 1042 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.2. 0.9.1 can show raw technical text and SavePoint's internal folder names in errors, ends a game started through a slow launcher too early, and lets the status pill cover footers. Install 0.9.2 over it. These files stay here unchanged so their checksums still match.

    A patch for 0.9.0. If you have 0.9.0, install this over it; your games, profiles and snapshots stay as they are.

    Fixed

    • Artwork for newer Steam games. Steam stores newer games' cover art under new file names and behind new web addresses, and 0.9.0 looked only for the old ones. On a Steam library of 950 games, SavePoint now finds 893 wide and 454 tall images on the computer, up from 720 and 380, and downloads the rest when online lookup is on. A game that already says "No artwork found" picks it up within 7 days, or right away with Look again in the game's editor. (#38)
    • The right Steam app id. Inside a Steam library, SavePoint now trusts Steam's own records over the game's steam_appid.txt, which some games ship with another game's id (Mafia III, House Flipper, Fallout 4 GOTY). It also reads files that end in a stray NUL byte and looks in common subfolders such as Binaries/Win64. (#39)
    • Big first snapshots show real progress. A large game used to sit on "1 files copied so far" for minutes while it worked. The bar now moves by the amount of data stored ("3.1 GB of 70 GB copied"), and the switch dialog and Activity use the same wording. (#37, #46)
    • Keep working. You can close the new-profile window while its first snapshot runs. The snapshot carries on, Activity and the status pill show how far it has got, and a message says when it is done. (#37)
    • Your Steam folder is always protected. SavePoint refuses to take over the Steam folder and every Steam library folder, wherever Steam is installed, not only in the default place. (#40)
    • Previews no longer count untouched files. A virus scan or a permission change could make a file look changed when it was not, so a preview counted it again. (D47)
    • No sample game in the template list. The "Simple Indie Platformer" example is gone, and the Skyrim template no longer assumes a Windows install path.

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • The three .tar.gz files are the source of the bundled git (git, Git for Windows, dugite-native), published with every release as the GPL asks.
    • SHA256SUMS.txt lists the hash of every file.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • The Linux desktop behavior (notifications, launcher-started games, single instance) has not been checked on a real desktop (#3).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads
  • v0.9.0 7b92406d8f

    SavePoint 0.9.0 (pre-release, superseded)
    All checks were successful
    Gate / linux (push) Successful in 13m19s
    Pre-release

    ethan-hann released this 2026-10-23 01:14:43 -05:00 | 1067 commits to main since this release

    Signed by ethan-hann
    GPG key ID: 67D2493BB9D34A5C

    Superseded by 0.9.1. 0.9.0 does not find artwork for newer Steam games, can count untouched files in a preview, and shows no progress during a large first snapshot. Install 0.9.1 over it. These files stay here unchanged so their checksums still match.

    The first pre-release of SavePoint: quicksave for your whole game folder. Take snapshots of a game's files and its saves together, switch between a vanilla and a modded setup, go back to any earlier snapshot, and keep every playthrough playable.

    This is a pre-release for testing. Everything below works and is covered by about 9,000 automated tests on Windows and Linux, but it has not had much use with real games yet. Please report anything odd with the bug report template.

    What's in it

    • Profiles, snapshots, and Play from SavePoint: it puts the right files in place, starts the game, follows it, and asks what to do with the session when you quit.
    • History with Go back to this, and Recently removed, where snapshots a profile moved past wait until you clear them.
    • Activity: every job with its progress and details, and most can be stopped.
    • Free up space, a storage move to another drive, and Remove all data.
    • Built-in help: press F1 for an illustrated guide, take the tour, or use the "What's this?" buttons.
    • Steam cover art, light and dark themes with five accents, two layouts, full keyboard use, screen-reader support, and reduced motion.

    Downloads

    • SavePoint-win-Setup.exe: Windows installer, for your user only.
    • SavePoint-win-Portable.zip: Windows, unzip anywhere and run SavePoint.exe.
    • SavePoint.AppImage: Linux x64. Run chmod +x SavePoint.AppImage, then run it. Ubuntu 22.04 and later need libfuse2, or run it with --appimage-extract-and-run.
    • The three .tar.gz files are the source of the bundled git (git, Git for Windows, dugite-native), published with every release as the GPL asks.
    • SHA256SUMS.txt lists the hash of every file.

    Known limits

    • The Windows packages are not code-signed yet, so SmartScreen asks before the first run (#17).
    • macOS is not packaged and has never run on a Mac (#2, #18).
    • The Linux desktop behavior (notifications, launcher-started games, single instance) has not been checked on a real desktop (#3).
    • Don't use SavePoint with online games protected by anti-cheat, and turn off cloud saves for any game it manages.
    • A preview can count a file as changed when something (an antivirus scan, a permission change) touched it without editing it, so the size estimate can run high. Fixed on main for the next release (D47).

    SavePoint is free software under the GNU GPL, version 3 or later.

    Downloads